Have you ever noticed the typically empty tarmac at Lake Mead around the Boulder Beach area? Today, I finally got to see some R/C enthusiasts flying their planes. And, their planes were pretty darn impressive!
Did you realize that the Hobby Manufactueres Association commissioned a study in 2010 and their findings suggest that 2010’s estimated sales were around $1.47 billion, about a 6.5% increase over 2009’s actual sales of roughly $1.38 billion. The report was broken down into various segments, including model railroading, radio control, and plastic & die cast models. What some may find surprising is that the model railroad hobby is larger, in terms of total manufacturer sales, than the r/c hobby, by about $60 million.
There are many types of radio-controlled aircraft. For beginning hobbyists, there are park flyers and trainers. For more experienced pilots there are glow plug engine, electric powered and sailplane aircraft. For expert flyers, jets, pylon racers, helicopters, autogyros, 3D aircraft, and other high-end competition aircraft provide adequate challenge. Some models are made to look and operate like a bird instead. Replicating historic and little known types and makes of full-size aircraft as “flying scale” models, which are also possible with control line and free flight types of model aircraft, actually reach their maximum realism and behavior when built for radio-control flying.
Radio-control scale aircraft modeling
Perhaps the most realistic form of aeromodeling, in its main purpose to replicate full-scale aircraft designs from aviation history, for testing of future aviation designs, or even to realize never-built “proposed” aircraft, is that of radio-control scale aeromodeling, as the most practical way to re-create “vintage” full-scale aircraft designs for flight once more, from long ago. RC Scale model aircraft can be of any type of steerable airship lighter-than-air (LTA) aviation craft, or more normally, of the heavier-than-air fixed wing glider/sailplane, fixed-wing single or multi-engine aircraft, or rotary-wing aircraft such as autogyros or helicopters.
Full-scale aircraft designs from every era of aviation, from the “Pioneer Era” and World War I’s start, through to the 21st century, have been modeled as radio-control scale model aircraft. Builders of RC Scale aircraft can enjoy the challenge of creating a controllable, miniature aircraft that merely “looks” like the full scale original in the air with no “fine details”, such as a detailed cockpit, or seriously replicate many operable features of a selected full scale aircraft design, even down to having operable cable-connected flight control surfaces, illuminated navigation lighting on the aircraft’s exterior, realistically retracting landing gear, etc. if the full-sized aircraft possessed such features as part of its design.
Various scale sizes of RC scale aircraft have been built in the decades since modern digital-proportional, miniaturized RC gear came on the market in the 1960s, and everything from indoor-flyable electric powered RC Scale models, to “giant scale” RC Scale models, in scale size ranges that usually run from 20% to 25%, and upwards to 30 to 50% size of some smaller full scale aircraft designs, that can replicate some of the actual flight characteristics of the full scale aircraft they are based on, have been enjoyed, and continue to be built and flown, in sanctioned competition and for personal pleasure, as part of the RC scale aeromodeling hobby.
These gents were kind enough to let me grab some shots. Very cool planes and once again another hobby that leaves very little in the bank.
